Fire Curtain

Fiber Shield – S Integrity

The Fiber Shield – S Integrity is a barrier that seals off specific areas upon detection of fire for safe containment.



 

Protection target

Description of the Fibershield – S system
  • Rectangular or polygon shaped based on the area of the closure.
  • Rectangular or customized corners that range from 30° up to 150° angles.
  • Creates corners without additional columns – low installation height.
  • Self-leveling bottom bar to give a flush sealing with the ceiling.
  • Unyielding bottom bars even with exposure to extreme temperatures.
  • Closed polygon shape or open systems with connection to the wall by special side guides, length up to 16 m and a drop length of up to 6 m.
  • Drive system "Gravigen" as a standard – closing without auxiliary power, co fire-rated cables necessary.
  • High number of cycles of the motors of 10.000 cycles.
  • Redundant drive units as fall protection.
  • Large fire protection closures of min. class C 1 according to DIN EN 3501-2.
Perimeter
of the system Drop length t
(mm) h
(mm) < 50 m < 3,0 m 490 125 < 50 m > 3,0 m – < 6m 490 125

At least 2 drive units and one more for each 10 m above 20 m perimeter

 

 

casing

 

 

bottom tray

Optional with spots or lightening strip
(if necessary the construction height has to be heightened)

 

 

Side guide for open polygones Bottom tray

pneumatic reset
(manual recommendation for H< 2,5 m) pneumatic cylinder (arrow)

 

 

Control units for fire protection closures

Control units for single closures:

  • without hold-open time in case of power failure
  • with up to 10 min hold-open time in case of power failure
  • with over 10 min hold-open time in case of power failure

 

Control units for multiple closures:

  • without hold-open time in case of power failure
  • with up to 10 min hold-open time in case of power failure
  • with over 10 min hold-open time in case of power failure